Maipu MP2000 Series Multi-Service CPE Router

MP2000-104A/B is a new generation Full Service CPE (Customer Premises Equipment) used in customer’s side of operator network such as MPLS, Metro E, VPLS and FTTH. MP2000-104A/B adopts new design to combine CPE router, CPE Voice Gateway, CPE security device into one box with full range of management features inside. This innovation enables Service Providers to reduce the total cost of equipment and huge management works for large numbers of CPE boxes in customer side.

Key Features

Strong routing and security function
It supports IP Sec VPN. The secure communication channel on Internet can solve voice-traversing NAT and provide security data and voice service.
It supports voice data VLAN tag, which divides voice data from layer 2. It also supports QoS to guarantee voice quality.
It supports routing and switching. MP2000 provides the Ethernet interface with wire speed switching function. And one of the interfaces can be configured as wan interface, using as router.
MP2000 has voice function, and its Ethernet module has the function of switch and router, and also VPN function.
It supports PPPOE, DHCP Server, Client and NAT.
It supports static routing protocol and will support dynamic routing protocols in future.

Various VoIP application function
It supports call id, call identification, call forwarding, call transfer, call wait, hot line dialup, FXO interface, VoIP network, PSTN network transparent auto switch, reverse polarity check, dialup delay, powerful IP fax, standard T.38 protocol, call routing, call limitation, Multi-number for one phone, Multi-phone with one number, IVR record, network management, accounting, standard RADIUS accounting protocol and Web configuration management.

Advanced security guarantee
It supports H.235 and SIP register authentication to prevent non-register equipment access. It also supports TACACS and RADIUS to prevent non-authorized user accessing to system, and the packet filtering and firewall configuration check and head off the attack of icmp flood, smurf, fraggle, port scan. It supports extended ACL and VLAN to control access and flow.

Structure
MP2000 router adopts optimized structure design with anti-shake, anti-low& high temperature, anti-electromagnetism radiation.

Technical Specifications

Item
MP2000-104A-AC
MP2000-104B-AC
Product configuration
10/100M
Ethernet interface
1FE (WAN) + 4FE (LAN)
1FE (WAN) + 4FE (LAN)
Voice interface
4FXS + 1FXO
4FXS + 1FXO
IPsec
Inbuilt
Inbuilt
Performance parameters
 
Processor
High-speed RISC processor
High-speed RISC processor
Flash
8Mbytes
32Mbytes
Memory
32Mbytes
64Mbytes
Standard and protocol
Link protocol
IEEE 802.2  (LLC) , IEEE 802.3  (Ethernet) , 802.1Q
Network protocol
TCP/IP, ICMP, UDP, FTP, TFTP, SNMP, TELNET, RLOGIN, DHCP, HTTP, DNS, ARP, PPPOE
Routing protocol
Static routing
Static routing, RIPv1/v2, OSPF, BGPv4
Network security
IPsec, IKE, PKI, CA, AAA
QoS
FIFO, PQ, CQ, FQ, WFQ, CBWFQ, LLQ, CAR, WRED, traffic-shaping
IP PHONE
DTMF, VAD/CNG, G.168-2000, RTP
ITU-T H.323, SIP, H.225.0  (RAS and Q.931) , H.245, H.450.x, T38,
G.711a, G.711u, G.723r63, G.729, G.729a, G.729wb
Management
SNMP, Web, Telnet, CLI
Physical index
Dimension  (WxDxH)
245mm x 200mm x 65mm
Weight
0.6kg
Power supply requirement
Input voltage  (AC)
100~240V, 50~60Hz
Power consumption
=<14W
Environment parameters
Operating temperature
0!40oC
Operating humidity
10~90%, non-condensing